This lesson describes how you can change and save settings to the fire trainer. Please check-out the instructional video and the detailed description below.
The fire trainer offers a lot of room for customization. The following parameters can be customized to customers preferred settings:
Training in “Automatic mode” or in “Manual mode”
Difficulty level between 1 and 4: 1 is easy to extinguish and 4 is hard to extinguish.
Lighting between 0% and 100%
Smoke quantity between 0% and 100% per fire place
Training time: time allowed for trainee to conduct the extinguishing task
Glowing spot relight timer indicates after how many seconds the fire should start again if the glowing spot is not properly cooled with the water can
Oven switch timer indicates after how many seconds the fire should start again if the oven switch was not switched off
Enable or disable cabin panic sound (optional)
Enable or disable burning smell (optional)
In order to save your preferred settings, follow the follwing steps:
Select your Program
Choose the program you would like to change, for example “INI A”
INI A will appear on the IOS page.
Select “Settings page”. Please note, this page is password protected!
Change settings on the Settings Page as desired.
Confirm your changes by selecting “Save data”
“Save Data” will illuminate yellow to confirm settings change.
Up to eight different settings can be saved. The standard settings are as follows:
Login
Accessing this course requires a login. Please enter your credentials below!